Wirenco 2/3 Metal Clad (MC) Cable with Ground, Aluminum Armored, Stranded Copper Conductors (5Ft Cut)

APPLICATIONS:Metal Clad Cable may be used for branch, feeder and service for distribution in commercial, industrial, and multi-residential construction. They are suitable for installation in motion picture studios, theaters, and places of assembly (100 people or more) per NEC Articles 230.43, 300.22(C), 330, 396, 518, 520, 530 and 645. These cables may be installed in approved raceways and as open runs of cable on a messenger. They may be installed exposed, concealed or in cable tray and may be run in spaces used for environmental air in accordance with NEC Article 300.22(C) ONLY.CONSTRUCTION:Solid conductors and the wires for stranded conductors are soft annealed copper to ASTM B3. PVC/Nylon type THHN insulation in accordance to UL 83, flame resistant, meeting UL VW-1. Bare copper ground wire, sized in accordance with NEC and UL, with green THHN insulation. Conductors are cabled with grounding wires. A marker tape/core protection tape combination assembles the core in an essentially round configuration. Interlocking galvanized steel tape armor applied directly over the core. flame test.STANDARDS:-UL listed 600 Volts at 90C dry / 75C wet, FT4-UL 44, 1569, 1581 and 1685-IEEEE 1202 70,000 BTU vertical flame test-Rated Fire Wall Penetration to 600 Volts at 90CClass 1 Div. 2, Class 2 Div. 2 and Class 3 Div. 1 and 2 for hazardous locationsSPECIFICATIONS:Size: 1 AWGGround Size: 6 AWGOutside Diameter: 1.13 inchesAmpere Rating THHN: 95 Amps @ 60C, 115 Amps @ 75C and 130 Amps @ 90CWeight: 0.934 lbs per foot

• Permitted use for service power and feeder distribution in industrial, commercial, and multi-residential buildings
• Permissible in theaters, audience areas of motion pictures, television studios, and similar locations (NEC 520.5)
• Allowable Ampacity of 95 Amps at 60C, 115 Amps at 75C and 130 Amps at 90C
• Outside Diameter of 1.13 Inches
• 6 AWG ground wire